Power Crown IT5000HD
Trả góp
Power Crown IT5000HD

Power Crown IT5000HD

Khuyến mãi:

Bảo hành:

Hotline: 0908 812 754
  • Power Output:
    • 20 mS Burst: 3,000 watts 
    • 20 Hz - 20 kHz: 2,000 watts 
    • 1 kHz: 2,000 watts 
    • 4-ohm Dual (per ch): 2,500 watts 
    • 8-ohm Dual (per ch): 1,250 watts 
    • 4-ohm Bridge: 4,000 watts 
    • 8-ohm Bridge: 5,000 watts 
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): +/-0.25dB 
  • Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 112 dB 
  • Total Harmonic Distortion at full rated power: < 0.1% 
  • Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -35 dB: < 0.2% 
  • Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000 
  • Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB 
  • Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 70 dB typical 
  • Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz) 
  • A/D, D/A Converters: 24-bit 192 kHz Cirrus Logic 
  • Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample-rate converter 
  • Network: Onboard TCP/IQ and HiQnet, compatible with standard 100 Mb Ethernet hardware 
  • DSP: 24-bit conversion with 32-bit, floating-point DSP processing 
  • Load Impedance: 
    • Stereo: 1/2/4/8/16 ohms 
    • Bridge Mono: 2/4/8 ohms 
  • Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V 
  • Required AC Mains: Universal AC input, 100-240VAC, 50/60 Hz (+/-10%