DCS Bartók DAC with Headphone Amplifier

Khuyến mãi:

Bảo hành: 1 năm

Tóm tắt : dCS Bartók network DAC with Class A headphone output 359 Triệu VNĐ
• dCS Bartók network DAC 299 Triệu VNĐ
• latest generation dCS Digital Processing Platform and Ring DACTM
• Supports UPnPTM, asynchronous USB and Apple AirplayTM sources, plus AES
and S/PDIF digital audio streams.
• Class A headphone amplifier stage drives low and high impedance phones
• Streaming services supported include TIDALTM and Spotify ConnectTM.
• multi-stage oversampling design, optional DSD upsampling; selectable filters
• auto-clocking system improves ease of use and minimises jitter
• Accepts encrypted SACD data from dCS Transports via Dual AES inputs.
• multi-stage power regulation and twin mains transformers
• firmware-upgradeable for future functionality and performance upgrades

Hotline: 0908 812 754
  • Type

    Upsampling Network DAC with Headphone Amplifier

  • Colour

    Silver or Black

  • Dimensions

    444mm / 17.5” x 430mm / 17.0” x 115mm / 4.6“. Allow extra depth for cable connectors.

  • Weight

    16.7kg / 36.8lbs

  • Converter Type

    dCS proprietary Ring DAC™ topology

  • Digital Inputs

    Network interface on an RJ45 connector – acts as a UPnP™ renderer in Asynchronous mode, streaming digital music from a NAS or local computer over a standard Ethernet network, decoding all major lossless formats including FLAC, WAV & AIFF at up to 24 bit 384kS/s native sample rate, plus DSD/64 & DSD/128 in DFF/DSF format. Other formats include WMA, ALAC, MP3, AAC & OGG. Some formats are limited to lower sample rates. Supports Apple AirPlay at 44.1 or 48kS/s. Network Loop Out connector on a second RJ45 connector. USB 2.0 interface on a B-type connector operating in Asynchronous mode, will accept up to 24 bit PCM at up to 384kS/s plus DSD/64 & DSD/128 in DoP format. Operates in Class 1 or 2 mode. USB-on-the-go interface on type A connector operating in Asynchronous mode, streams digital music from a flash drive at up to 24 bit 384kS/s plus DSD/64. 2x AES/EBU on 3-pin female XLR connectors. Each will accept PCM at up to 24 bit 192kS/s or DSD/128 in DoP format. Used as a Dual AES pair, it will accept PCM at up to 384kS/s, DSD/64 & DSD/128 in DoP format or dCS-encrypted DSD. 2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each will accept PCM at up to 24 bit 192kS/s or DSD/64 in DoP format. 1x SPDIF optical on a Toslink connector will accept PCM at up to 24 bit 96kS/s

  • Analogue Outputs

    Output levels: 0.2, 0.6, 2 or 6V rms for full-scale input, set in the menu. Balanced outputs: 1 stereo pair on 2x 3-pin XLR male connectors. These outputs are electronically balanced and floating. Output impedance is 3Ω, maximum load is 600Ω (10k-100kΩ is recommended). Unbalanced outputs: 1 stereo pair on 2x RCA phono connectors. Output impedance is 52Ω, maximum load is 600Ω (10k-100kΩ is recommended).

  • Headphone Outputs

    1 stereo balanced pair on 1x 4-way male XLR connector. 1 stereo unbalanced pair on 1x 6.35mm (1/4”) 3-pole jack. Full-scale output levels are 1.4W rms into 33Ω, 0.15W rms into 300Ω. Output levels are 0, -10, -20, -30dB, set in the menu. Minimum headphone impedance is 33Ω.

  • Wordclock I/Oworldclock Io

    2x Word Clock Inputs on 2x BNC connectors, accept standard word clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz. The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. Word Clock Output on 1x BNC connector. In Master mode, a TTL-compatible word clock appears on this output.

  • MQA

    Full decoding and rendering of MQA data from the Network and USB2 inputs. Final rendering of unfolded MQA data only from the other inputs.

  • Residual Noise

    24-bit data: Better than –113dB0, 20Hz - 20kHz unweighted. (6V output setting)

  • L R Crosstalk

    Better than -115dB0, 20Hz – 20kHz

  • Spurious Responses

    Better than -105dB0, 20Hz – 20kHz

  • Filters

    PCM mode: up to 6 filters give different trade-offs between the Nyquist image rejection and the phase response. DSD mode: 4 filters progressively reduce out-of-audio band noise level.

  • Conversions

    DXD as standard or optional DSD upsampling

  • Software Updates

    Download and update functionality available via Bartók App

  • Local Control

    dCS Bartók app for unit configuration and playback. RS232 interface (controlled by a 3rd party automation system). dCS Universal IR remote control is available as an optional extra.

  • Power Supply

    Factory set to either 100, 115/120, 220 or 230/240V AC 50/60Hz.

  • Power Consumption

    30 Watts typical / 50 Watts maximum.