Accuphase P-7100 Power Stereo Ampli

Giá hãng: VND

Khuyến mãi: Tặng kèm

Bảo hành: 3 năm

Hotline: 0908 812 754
Continuous Average Output Power (20 - 20,000 Hz)
Stereo operation 1,000 watts per channel into 1 ohm (>)
(both channels driven) 500 watts per channel into 2 ohms
 250 watts per channel into 4 ohms
 125 watts per channel into 8 ohms
 Monophonic operation 2,000 watts into 2 ohms (>)
(bridged connection) 1,000 watts into 4 ohms
 500 watts into 8 ohms
Note: Load ratings marked (>) apply only to operation with music signals.
m Total Harmonic Distortion Stereo operation (both channels driven) 0.05% with 2 ohm load
 0.03% with 4 to 16 ohm load
 Monophonic operation (bridged connection) 0.03% with 4 to 16 ohm load
m Intermodulation Distortion 0.01%
m Frequency Response At rated output: 20 - 20,000 Hz +0, –0.2 dB
 At 1 watt output: 0.5 - 160,000 Hz +0, –3.0 dB
m Gain 28.0 dB (with GAIN selector at MAX)
m Gain selection MAX, –3 dB, –6 dB, –12 dB
m Output Load impedance Stereo operation: 2 to 16 ohms
 Monophonic operation: 4 to 16 ohms
m Damping Factor 300
m Input Sensitivity Stereo operation 1.26 V for rated output
(with 8-ohm load) 0.11 V for 1 watt output
 Monophonic operation 2.52 V for rated output
 0.11 V for 1 watt output
m Input Impedance Balanced: 40 kilohms
 Unbalanced: 20 kilohms
m Signal-to-Noise Ratio
(A-weighted, input shorted, 122 dB (GAIN selector in MAX position)
 At rated output) 127 dB (GAIN selector in -12 dB position)
m Output Level Meters Logarithmic scale, with defeat switch
 –60 dB to +3 dB (indication in %)
m Power Requirements AC 120 V / 230 V, 50 / 60 Hz
 (Voltage as indicated on rear panel)
m Power Consumption 135 watts idle
 945 watts in accordance with IEC-60065
m Maximum dimensions 465 mm (18-5/16”) width
 258 mm (10-3/16”) height
 545 mm (21-7/16”) depth
m Mass 49.0 kg (108.0 lbs.) net
 58.0 kg (127.9 lbs.) in shipping carton